MAX Dock Support Options

MaxLoc Crossmembers

  This is the easiest to install and the strongest support system for standard 4'' stringer aluminum dock.

  Constructed with a 2x4 in. extruded crossmember and a solid anodized clamp.  The flat crossmember

  area keeps dock sections securely aligned especially when spanning 2 sections. Just adjust the height 

  with a 5/16 hex wrench and your done. Strong enough to span 24' so there is endless options to build

  platforms. These are our #1 selling crossmembers and actually cost less than the old traditional style. 

  Price includes Stainless and Brass nuts/bolts to mount dock sections.

 
 
 

3' MaxLoc  Crossmember    $70.00 plus 6% tax               8' MaxLoc Crossmember  $126.00 plus 6% tax

4' MaxLoc  Crossmember    $75.00 plus 6% tax    10' or 12' MaxLoc Crossmember  $196.00 plus 6% tax

5' MaxLoc  Crossmember    $95.00 plus 6% tax    15' or 16' MaxLoc Crossmember  $227.00 plus 6% tax

6' MaxLoc  Crossmember  $108.00 plus 6% tax    20' or 24' MaxLoc Crossmember  $332.00 plus 6% tax

 

   Note: 9' and wider MaxLoc Crossmembers have an additional leg socket in the center which accepts a

   third pole for even greater rigidity. The socket allows for 18'' of pole height underdock adjustment.

 

   All MaxLoc crossmembers are available in "T" and "L" versions at no additional cost. These allow for

   underdock bracing support that makes for seamless above the dock 90 degree turns and platforms.

   

Aluminum Dock Support Poles 2in. Diameter

                 2' Aluminum Pole $11.00 plus 6% tax          7' Aluminum Pole $24.00 plus 6% tax

                 3' Aluminum Pole $13.00 plus 6% tax          8' Aluminum Pole $26.00 plus 6% tax

                 4' Aluminum Pole $15.00 plus 6% tax          9' Aluminum Pole $29.00 plus 6% tax 

                 5' Aluminum Pole $18.00 plus 6% tax        10' Aluminum Pole $33.00 plus 6% tax

                 6' Aluminum Pole $21.00 plus 6% tax        12' Aluminum Pole $36.00 plus 6% tax 

 

                                

    When using poles greater than 6' in length which are usually located at the deep end of a dock we 

    recommend adding MaxLoc Deep Water X Braces for added rigidity. Another option for deep water

    is to use Max Stands (sold below) and add longer poles as necessary to them.

       

                                         MaxLoc Deep Water X Brace $53.00 plus 6% tax            

Bottom Plates and Augers

  We grew tired of all the bottom plates and augers that were available so we decided to make our own.

  Most of the bottom plates out there didn't have holes so they never really could grip the lake bottom.

  And we all know too well what happens to those imported cast augers. So we designed and built them 

  out of Military Grade Composite. You can try and destroy them but please be careful as we have had

  some OEM's with entertaining stories. 

    

     RUGGED 8"X8" BOTTOM PLATE - this is the future of bottom plates. Lightweight, no sharp edges,

     and is beyond durable. Perfect for sandy or silty bottoms. You can also slide a pole through them

     to add more rigidity or just to even your pole heights for asthetics.  $10.00 plus 6% tax

                                                                                                                                                                     

     TORQ'D AUGERS - finally an auger that doesn't break into pieces and add senseless weight to an

     install. Use these when you need to get down and grip some lake bottom. Or add a few of them

     to your dock if you plan to tie a boat off.                                        $10.00 plus 6% tax       

MaxStands - Aluminum Dock Stands

  These heavy duty welded alumimum stands are great for those areas where extra support is desired or

  they can be used for the entire dock when dealing with very rough water locations. The legs angle out

  from top to bottom in an "A" frame stance which increases in width the more the height increases so

  hence more rigidity. These are true underdock supports for those who desire a seamless looking dock. 

 

  The standard MaxStand adjusts from 3' to 6' in height and the "Shorty" adjusts from 18'' to 36'' and

  comes standard with Rugged bottom plates. If your location requires height beyond the standard 6' 

  we sell the stands less poles and bottom plates so you can add longer pole lengths as needed. They 

  are also are available in widths up to 20' for building platforms.    

  

  If you need the absolute ultimate in support we carry the MaxStand Elite Kits which contain diagonal

  side braces as well as extra long horizontal braces.          

 

 

3' wide standard MaxStand $149.00 plus 6% tax         12' wide standard MaxStand $360.00 plus 6% tax

4' wide standard MaxStand $159.00 plus 6% tax         16' wide standard MaxStand $465.00 plus 6% tax 

8' wide standard MaxStand $190.00 plus 6% tax         20' wide standard MaxStand $500.00 plus 6% tax

                                                       

                              3' MaxStand 3'-6' less poles/bottom plates $115.00 plus 6% tax

                              4' MaxStand 3'-6' less poles/bottom plates $125.00 plus 6% tax

                              3' "Shorty" Stand less poles/bottom plates $100.00 plus 6% tax

                              4' "Shorty" Stand less poles/bottom plates $110.00 plus 6% tax

 

     MaxStand Roll-in Wheel Kit - coverts any stand to a tool-less roll-in dock with an axle, wheel, post,              pad, and clamp. Two required per stand.  MaxStand Roll-in Wheel Kit  $120.00 ea. plus 6% tax

 

               MaxStand Elite Kit  - extra long brackets and diagonal braces $70.00 plus 6% tax  

          

T and L / Seawall Brackets

        Aluminum Brackets for connecting dock sections when "teeing off" or making "L" 90 degree turns

        These are what you need for securing the first dock section to a seawall. We like to use these for

        turns and when connecting to a platform as they add a lot of rigidity to the whole assembly.  

 

                   3' T and L Bracket $54.00 plus 6% tax      4' T and L Bracket $57.00 plus 6% tax

Max Traditional Hardware

 

       MAX TRADITIONAL ALUMINUM DOCK HARDWARE 

 

For those who wish to match up traditional "old school" hardware.

Stringer Brackets are extruded aluminum and Cross Arm Clamps

are stamped aluminum. Not to be confused with the imported cast

hardware that will crack and break.

 

                         

                Stringer Bracket $14.00 plus 6% tax                           Diagonal Clamp $14.00 plus 6% tax

              Cross Arm Clamp $14.00 plus 6% tax                     Parallel Bracket Set $14.00 plus 6% tax

 

                                                   TRADITIONAL CROSS ARMS 

 

      3' Aluminum Cross Arm $15.00 plus 6% tax                6' Aluminum Cross Arm $36.00 plus 6% tax 

  3'3'' Aluminum Cross Arm $16.00 plus 6% tax             6'3'' Aluminum Cross Arm $41.00 plus 6% tax

     4' Aluminum Cross Arm $18.00 plus 6% tax                        8' Steel Cross Arm $47.00 plus 6% tax

 4'3'' Aluminum Cross Arm $18.00 plus 6% tax                     8'3'' Steel Cross Arm $53.00 plus 6% tax