PWC/ JET SKI LIFTS

***All Prices Subject To Change At Any Time Without Notice!***

8' Truck Bed Example

Boat Trailer Example

6'x12' ATV/ Utility Trailer- Must Have No/ Low Side Rail To Angle Lift On Top Or Overhang- Requires 7' Wide to Fit Inside

6' Truck Bed Example

Single PWC Trailer With Temporary Boards (Aluminum Tube Used Here) Across Frame

Two Sideways on 6'x12' ATV/ Utility Trailer- Must Have No/ Low Side Rail To Angle Lift On Top Or Overhang

Boat Trailer With Temporary Boards to Prop Lift Across

Easy 1-Person Installation with Foam Strips or Can Be Carried by 2 People

 

 

LiftCo PWC Lifts

 

LIFTCO 1,200# Capacity, 64" Inside-Width PWC/ Jet Ski Lifts are a cantilever-style lift that swing up and down with a high-lifting range, all the while allowing for shallow-water use. These lifts are some of the beefiest cantilever PWC lifts around and feature: an oversized 1,500# winch for easy cranking, premium 7' aluminum/poly bunks with adjustable mounting brackets (no wood or carpet to ever need replacing), and adjustable-height legs to accomodate your specific water depth and level the lift or accomodate for water height fluctuations. Light enough to drag around to install with just one person, or easily carried by two adults, which makes leg adjustments a breeze!

 

Need a double jet ski lift? We NEVER recommend them, nor do we sell them! Two individual lifts is always better, you have more configuration possibilities to gain easy access to both skis without having to make a slip on both sides with extra dock, plus it is much easier to install and level two individual lifts! Double-PWC lifts from the competition are generally two modified individual lifts that are spliced together with awkard framework that makes it weak, heavy and awkward. Unless you make a slip around them, you have to climb over one ski to get to the other, or have the whole thing perpendicular to your dock with no realistic easy way to board, fuel and cover either one. The exception that we sell (albeit not a lift) is a dual Wave Armor PWC Wave Port setup (further down on this page) with a port-to-port connector, since those allow you to walk down the center of the two skis to easy access to both while installed perpendicular to the dock.

 

LIFTCO 1,200# Capacity, 64" Wide PWC/ Jet Ski Lift- 2 Ft. Tall Round Tube Adjustable Legs

(FULLY ASSEMBLED w/ 1 Optional Step Included- Most Common)- $1,850 plus tax

Lift Only (Without Step, Fully Assembled)- $1,730 plus tax

Add $120 each plus tax for each optional Titan Composite Side-Step

 

LIFTCO HD/ XL Version 1,200# Capacity, 64" Wide PWC/ Jet Ski Lift w/ HD Leg Sockets & Many Other Additional Welded Frame Gussets & XL 4 Ft. Square Tube Adjustable Legs

(FULLY ASSEMBLED w/ 1 Optional Step Included- Most Common)- $2,170 plus tax

HD/ XL Lift Only (Without Step, Fully Assembled)- $2,050 plus tax

Add $120 each plus tax for each optional Titan Composite Side-Step

 

 

LIFTCO 1,200# Capacity, 76" Wide Jon Boat Lift w/ HD Leg Sockets & XL 4 Ft. Square Tube Adjustable Legs (FULLY ASSEMBLED w/ 1 Optional Step Included)- $2,350 plus tax

Add $120 each plus tax for each optional Titan Composite Side-Step

 

 

Add $399 plus tax for a second pair of bunks and brackets (for dual-stand-up skis- best on 76" lift, though many can squeeze onto 64")

Wave Armor- Wave Port SLX & Evo Floating Jet Ski Docks

Two Wave Armor SLX-6 Models Shown Above with Port to Port Attachment Kit and Wave Dock Direct Attachment Kit to Secure Them

 

Two Wave Armor SLX-6 Models Shown Above with Port to Port Attachment Kit, Z-Bracket Sea Wall Attachment Kit and Augured 2" O.D. Dock Poles to Secure Them

 

Two Wave Armor SLX-6 Models Shown Above with Port to Port Attachment Kit and Augured 2" O.D. Dock Poles to Secure Them

 

 

Wave Armor- Wave Port Floating PWC Docks

 

The Wave Port SLX or Pro Maxx PWC Ports by Wave Armor are our best option for customers who simply want the easiest access around the jet ski while loading riders, and especially when fueling or covering the ski without having to get in the water or awkwardly lean over the bow of the PWC! 

 

Also, it is the best solution for extremely mucky areas, or rivers/ lakes that experience large seasonal water depth fluctuations (1-2 ft.+ of seasonal variation), causing a traditional aluminum PWC lift to constantly be adjusted or repositioned to suit the changing depths, or potentially even have your jet ski float away! If you have extreme muck where a traditional PWC lift would just sink constantly and cause issues (more than shin deep muck) these may be your only option. e great for people who simply want to easily walk around the jet ski for easy access to fuel and cover the ski without having to get in the water!

 

The Pro Maxx 6 (Apex 6, also formerly named Evo 6) is the answer to the largest machines out right now, with an additional 2 feet of length and 300 lbs. more weight capacity than the SLX 6, with wider, heavier duty rollers to accomodate the monster PWCs now being offered. The extra length and buoyancy generally mitigates some of the potential impact of waves as well (like a larger boat does), plus gives a little extra space when covering the stern of the ski. 

 

We carry the SLX-6 and Pro Maxx-6 (Apex 6) models. Due to the different socket locations, as well as having SLX or PRO series-specific connectors/ post sockets, they cannot be mismatched if you intend to link them together, port-to-port. For example, many customers who have a lightweight 2-seat pwc (ie. Seadoo Spark or Blaster EX, etc.) as well as one of the heaviest, cannot link an SLX 6 to a Pro Maxx 6, it must either be two SLX 6 or two Pro Maxx 6, or the two mismatched ports can be used entirely independently.

 

If you live on an incredibly rough lake (connected to Lake Michigan, etc. with yacht traffic), these probably are not the option for you, we offer other vertical options to tailor to you!

 

Poles, augers and other attachments are NOT included in the price, and will vary depending on the required length for your specific water depth and muck- see pricing, below.

 

 

Quick PWC Port Pricing Examples:

 

Single SLX-6 PWC Port

(Assuming 4' Water Depth, Sandy Lakebed- Choose Longer Poles Accordingly As Necessary For Deeper/ Muckier/ Seasonal Flooding)

 

- SLX-6 Ports w/ Bow Stop & 10" Anchor Shock Bungee w/ Stainless Steel Carabiner For Bow Stop To Secure Ski

- Two Pairs of 2" Flush Post Sleeves/ Bushings

- Four 10 Ft. HD Aluminum Poles with Four Composite Augers

 

$2,605 plus 6% tax

Single PRO MAXX-6 PWC Port

(Assuming 4' Water Depth, Sandy Lakebed- Choose Longer Poles Accordingly As Necessary For Deeper/ Muckier/ Seasonal Flooding)

 

- PRO MAXX-6 Ports w/ Bow Stop & Stainless Steel Chain with Carabiner To Secure Ski

- Two Pairs of 2" Flush Post Sleeves/ Bushings

- Four 10 Ft. HD Aluminum Poles with Four Composite Augers

 

$2,960 plus 6% tax

Two SLX-6 PWC Ports, Connected

8

(Assuming 4' Water Depth, Sandy Lakebed- Choose Longer Poles Accordingly As Necessary For Deeper/ Muckier/ Seasonal Flooding)

 

- Two SLX-6 Ports w/ Bow Stops & Two 10" Anchor Shock Bungee w/ Stainless Steel Carabiner For Bow Stop To Secure Ski

- Two Pairs of 2" Flush Post Sleeves/ Bushings

-Port-to-Port Connector

- Four 10 Ft. HD Aluminum Poles with Four Composite Augers

 

$4,958 plus 6% tax

 

 

Two PRO MAXX-6 PWC Ports, Connected

(Assuming 4' Water Depth, Sandy Lakebed- Choose Longer Poles Accordingly As Necessary For Deeper/ Muckier/ Seasonal Flooding)

- Two PRO MAXX-6 Ports w/ Bow Stops & Stainless Steel Chains with Carabiner To Secure Ski

- Two Pairs of 2" Flush Post Sleeves/ Bushings

-Port-to-Port Connector

- Four 10 Ft. HD Aluminum Poles with Four Composite Augers

 

$5,668 plus 6% tax

 

 

Two SLX-6 PWC Ports, Independent

(Assuming 4' Water Depth, Sandy Lakebed- Choose Longer Poles Accordingly As Necessary For Deeper/ Muckier/ Seasonal Flooding)

 

- Two SLX-6 Ports w/ Bow Stops & Two 10" Anchor Shock Bungee w/ Stainless Steel Carabiner For Bow Stop To Secure Ski

- Four Pairs of 2" Flush Post Sleeves/ Bushings

- Eight 10 Ft. HD Aluminum Poles with Four Composite Augers

 

$5,210 plus 6% tax

 

Two PRO MAXX-6 PWC Ports, Independent

(Assuming 4' Water Depth, Sandy Lakebed- Choose Longer Poles Accordingly As Necessary For Deeper/ Muckier/ Seasonal Flooding)

 

- Two PRO MAXX-6 Ports w/ Bow Stops & Stainless Steel Chains with Carabiner To Secure Ski

- Four Pairs of 2" Flush Post Sleeves/ Bushings

- Eight 10 Ft. HD Aluminum Poles with Four Composite Augers

 

$5,920 plus 6% tax

 

 

Wave Armor PWC Port A La Carte Pricing:
 
WAVE PORT SLX 5- 5' Wide x 13' Long (1,500 lb. capacity) with Bow Stop & Roller Wheels (Requires Connectors/ Attachments) We Only Recommend These Where 6' Wide Will Not Fit- Not Enough Room to Walk Around PWC- $1,995 plus 6% tax
 
 
WAVE PORT SLX 6- 6' Wide x 12.6' Long (1,800 lb. capacity) with Bow Stop & Roller Wheels (Requires Connectors/ Attachments)- $2,090 plus 6% tax

(This Is Our Top Selling Model- The Extra Width Provides Walking Space Around The Edge)

 

 

 

WAVE PORT Pro Max 6 (Formerly Called Apex 6 or EVO 6)- 6' Wide x 14.4' Long (2,100 lb. capacity) with Bow Stop & Roller Wheels (Requires Connectors/ Attachments)- $2,470 plus 6% tax

(This Is 2 Feet Longer Than The SLX Model To Better Accommodate Today's Heaviest PWCs or Extremely Wavy Areas)

 

 
APEX SPORT PORT - 5' Wide x 11' Long with Bow Stop & Roller Wheels (Requires Connectors/ Attachments)- $1,639 plus 6% tax
(This Model Is Only Intended For SEADOO Sparks or Other Small 2 Seat PWCs Under 700 lbs.)
 
 
 
WAVE PORT ATTACHMENT PARTS
 

2" Raised Pole Bushing (Pair)- for Wave Port SLX & EVO (Two Pairs & 4 Augured Mooring Poles Recommended, Sold Separately)$81 plus 6% tax 

 

Snap Cover Plugs- Fills Unused Rear Mooring Holes In Wave Port SLX (If You Only Use Poles or Sea Wall Bracket In The Front, Sold As A Pair)$69 plus 6% tax 

 

Z-Bracket Sea Wall Attachment Kit- for Wave Port SLX & EVO (Requires 2" Augured Poles, Sold Separately)$205 plus 6% tax 

 
 

Port to Port Attachment Kit- for Wave Port SLX & EVO (Pair of Connectors to Link 2+ Wave Ports Together)$238 plus 6% tax 

 
 

SLX Direct Connect Kit To Wave Dock- for Wave Port SLX$361 plus 6% tax 

 

 

 

Wave Port Anchoring Poles- 2" O.D. with HD 0.120" Wall Thickness

Augured Poles Need to be Augered a Minumum of 2-3' into Solid Lakebed and Extend A Minimum of 3+ Feet Above The Water Surface Due To Float Thickness, Plus To Avoid Floating Off Of Your Poles In Waves!

 

For instance, in 4' of water depth with a SANDY lake bed and steady annual water level, you will need at absolute minumum 10' poles with augers to ensure that it is properly secured to the lake bed and will not float off the top of the poles in waves! If you have muck or seasonal lake level variations (which is why most of you will be requiring one of these, you'll need to add extra length for that- yes they will seem outrageously long for your water depth, but that is correct. Ensure that the PWC Ports are in AT LEAST 4 feet of water depth for save PWC use while docking. We ALWAYS recommend 4 augured poles per port.

 

 

Composite Auger- $19 plus tax each

 

8' HD Aluminum Pole $50 plus 6% tax

9' HD Aluminum Pole $57 plus 6% tax

10' HD Aluminum Pole $63 plus 6% tax

12' HD Aluminum Pole $76 plus 6% tax

16' HD Aluminum Pole $100 plus 6% tax

24' HD Aluminum Pole $146 plus 6% tax

Wave Port PWC Dock Model Comparison Chart

ePaper
Share:

WAVE ARMOR Wave Port SLX Brochure

ePaper
Share:

Max Lifts- 1,500# Vertical PWC/ Jet Ski Lift

 

Max Lifts- 1,500# Vertical PWC/ Jet Ski Lift

 

Need something a little beefier for your massive new three-seater jet ski? Is the water too deep for a standard cantilever-style Great Lakes PWC Lift? Max Lifts has the answer with their 1,500#, 68" inside width PWC/ jet ski lift- big enough for just about any modern ski!

 

Includes: Manual Winch Box w/ 30" Crank Wheel & Pair of 8' Poly/ Aluminum Bunks

 

Optional Auger Kits, Side Steps, Bumpers Shown Above are Sold Separately

 

Max Lifts- 1,500# Vertical PWC/ Jet Ski Lift- Unassembled- $3,651 plus tax

 

***All prices, available inventory, and product lines are subject to change without notice!***

Lifts Ladders And Docks.Com:

A Division of BlueScape, Inc.

Store and Warehouse

Google Maps & Reviews- Click HERE

 11811 S. Shaver Road

    Schoolcraft, Michigan 49087 

  (Just South of Kalamazoo, MI)

 

For Quotes or Service:

 

Brent

Boat Lift & Dock Sales and Service

Text or Call:

269-888-1419 Ext. 101

Click below for a quick quote:

lakefrontexperts@gmail.com

_________________

Dennis

Dock & General Sales

Call:

269-888-1419 Ext. 102

Click below for a quick quote:

lakefrontexperts@gmail.com

_________________

Dave

Dock & Dealer Sales

Call:

269-888-1419 Ext. 103

Click below for a quick quote:

lakefrontexperts@gmail.com

 

HOURS:

Boating Season Hours:

Tuesday-Friday 12:00 pm - 5:30 pm

Saturday 10 am - 1 pm

Sunday & Monday- CLOSED

We're Available Most Business Days In The Mornings By Appointment- Just Text Ahead For Availability

 

 

WE ACCEPT:

Cash or Checks

Or

All Major Credit / Debit Cards with a 4% Fee Added To Total Bill


Lifts, Ladders and Docks BBB Business Review

      Dealers for:

Print | Sitemap
© Lifts Ladders and Docks.com, a BlueScape, Inc. Company. 11811 S. Shaver Rd. Schoolcraft, MI 49087 (Just South of Kalamazoo). ***All prices, available inventory, and product lines are subject to change without notice!*** We Add A 4% Service Fee For Credit/ Debit Card Purchases!