Wholesale Marine Parts

SUPERIOR COMPOSITE AUGERS

Fits all standard 2.00" O.D. dock poles (between .080" and 1.25" HD wall-stock pole thickness), increasing adaptability and cutting down on stock; 2 sizes with one part number! Also available in 'GLL' version for 1.57" O.D. poles and others! We've torture-tested these (and invite you to stop by and do the same!) and have sold nearly 40,000 of these from 2015-2024 and growing!

Believe it or not, the impact resistant composite is far more durable than average cast aluminum augers, plus less weight and fits multiple pole I.D.s in one without having to grind down the shank of the cast aluminum auger, or have too much slop from the small-shank varieties of cast augers!

 GRIPPER CAPS for Dock/ Pier Poles!

     Our tapered-gripper-fins tap-in easily with a dead-blow or rubber mallet in a variety of pole stock (wall thickness between 0.080"-0.125") and stay in place better; with far less wasted caps and fewer smashed fingers or multiple varieties needed compared to straight-wall finned caps.

Our caps also have a slight crown ridge across the center to avoid water puddling on top of the cap, and much cleaner, low-profile look and fewer accidental smashed caps versus high-domed varieties on the market! Made from an outdoor-use rated composite with UV stabilizer, sold by the case.

 Round Caps: 1", 1.5", 2" Poles- in Black

      Square: 1.5" and 2" sizes in Black

      Rectangular: 1.5" x 2", 1.5" x 3" Gray

 FOAM ISLAND SWIM RAFTS

OR USE FOR EASY DOCK/ BOAT LIFT INSTALLATION!

 For Dock and Boat Lift Installation & Removal (best when cut into 9" wide x 6'5" long strips for boat lifts, simply bundle a cube of 9-12+ strips together with a ratchet strap for easy carrying and using for dock installation!

Also incredibly popular as Swim Rafts!

5' x 6' x 4.5" thick- Offered to Dealers in Black or Gray

 High Quality Closed-Cell Foam- 1,000+ Lb. Capacity Each (when evenly distributed)!

HEAVY DUTY ANODIZED ALUMINUM FLIP-LADDERS

       Strong, attractive and affordable!

       All-aluminum construction with anodized coating to keep it cool to the touch and looking great for many years to come! Our 4" wide tread and thick-diameter grip offer superior user comfort versus narrow tread and square tube designs! Simply drill 4 holes through your dock surface in the indended location and bolt through, using the provided dock-reinforcement backing plates!

       Available with or without flip-kits; flip kits allow the ladder to be flipped up and out of the water when not in use, keeping the treads cleaner and safer with less otherwise inevitable algae growth and slipperiness on the treads. Remember to factor your dock surface height above water in your measurements!

     Offered in 3, 4, 5, and 6 Step Sizes to suit nearly any application from docks to sea walls!

      PONTOON / DOCK LADDERS

      Standard "J" Hook Mounting with Footmans Loop Attachment allows for easy removal and storage out of the way!

      Non-Skid steps with a wide 4" tread make for a comfortable ladder

      A great value- offered in 3 or 4 step sizes

RUGGED BOAT LIFT KNOBS

Full spinner-knob in gray

Back to Back flange nuts recommended

Ergo design is gentle on the hand and easier to crank than most OEM knobs!

Long-neck design eliminates bloody knuckles from scraping the wheel as you spin!

Rated for outdoor use with UV stabilizer

SUPERIOR DOCK TRANSPORT CLIPS

NOW- Updated design is 213% Stronger than our previous clips!

Fast installation tapered pilot hook- grips top rail of F-Channel Dock Stringer

.490 (1/2") Channel

Keeps sections aligned, allows for safer stacking and more reliable transport when strapped on a trailer! Made from premium composite, these are a must for dock manufacturers and for annual winter dock storage!

DOCK CORNER GUARDS

Fits most standard 4" side-stringer dock

Protects boats and people from sharp dock corners

Simple and economical- attaches easily with self-tapping screw

CROSS ARM CLAMPS & STRINGER BRACKETS

Stamped Aluminum (stronger than brittle cast-aluminum clamps)

Stainless bolts/washers with Zinc nuts

Steep vertical wall grip at clamp

DOCK CORD CLIPS

Manage electrical cable and hoses on your dock  great for marinas looking to tidy-up their piers!

Flex-release design fits heavy-guage electrical cords or standard-diameter flush hoses

Available in high-visibility 'OSHA Yellow'