Replacement Boat Lift & PWC Lift

Cables / Winch Tubes / Winches / Bunks

***All Prices Subject To Change At Any Time Without Notice!***

*Cash/ Check Prices Shown- Add 4% Service Fee For Credit/ Debit Card Purchases*

Vertical boat lift (boat hoist) cables are almost always brand-specific, as well as specific to the weight capacity, inside-width and exact position/ routing on your particular lift. We offer aftermarket replacement cables for Max Lifts, select models of SHORESTATION® Lifts, as well as a few other brand options for winch cables, listed below. If you do not see your lift brand/ size listed here, please contact a dealer of that particular brand with the same info listed below- we do not custom make cables.

We'll need you to provide: the brand and weight capacity, inside-width AND a picture of your lift showing the whole lift (please point to and/or edit the photo to highlight the cable routing needed) to determine which cable is needed.

AFTERMARKET REPLACEMENT CABLES FOR SHORESTATION®*

BOAT LIFTS / HOISTS (2,600- 4,000 LB. CAPACITY)

Sooner or later, your ShoreStation® brand cables are bound to snap, despite all the proper maintenance and care, broken cables are a fact of life in the boat lift world as they are a wear-item. We stock the most popular size aftermarket replacement cables for ShoreStation®* brand boat lifts. We test our cables to 10,000lbs. of tensile strength, ensuring many years of reliable use in your ShoreStation® brand lift at a fraction of the cost of OEM! These are AFTERMARKET replacement cables are not authentic ShoreStation® brand cables.

**Cable shipments will be subject to $25 handling fee (we have to package and more importantly, drive them to another facility out of our way for drop off, we have over an hour of time involved in each shipment) plus cost of shipping and 3% credit card fee**

Replacement Aftermarket Winch Cable- Galvanized Steel for ShoreStation® brand lifts 26/30/36/4000lb. Lifts-108" or 120" Width-  $110 plus tax

Replacement Aftermarket Lift (Split) Cable- Galvanized Steel for ShoreStation® brand lifts 26/30/36/4000lb. Lifts-108" or 120" Width-  $230 plus tax

Replacement Aftermarket Stainless Steel Leveling Cable for ShoreStation® brand lifts 26/30/36/4000lb. Lifts-108" Width-  $165.00 plus tax

Replacement Aftermarket Stainless Steel Leveling Cable for ShoreStation® brand lifts 26/30/36/4000lb. Lifts 120" Width  $185.00 plus tax

Replacement Aftermarket 26'6" Galvanized Winch Cable for NuCraft/ Craftlander® Brand 3,500-4,500lb. Lifts  $128 plus tax

PWC Lift Replacement- 21ft. (3x16" Galvanized) Universal Cable for PWC Lifts w/ Eyelet Fittings- Tested to 2000lbs. Tensile Strength-Can be Trimmed to 18' For Older Lifts $44.00 plus tax 

 AFTERMARKET BOAT LIFT / BOAT HOIST BUNKS

SUPERIOR- POLY/ALUMINUM BUNKS- SUPERIOR DESIGN, UNIVERSAL FIT

SUPERIOR 12' Poly Aluminum Replacement Bunks are a 'one and done' solution for your boat lift! No more continually replacing carpeted-wood bunks just to get a few years of use before they need replacing again, or getting stuck with broken bunks during the summer leaving you with nowhere to store your boat! The aluminum extrusion will last a lifetime and the poly vinyl cover provides protection for your boat that will not rot out like marine carpet, nor does it trap sediments and essentially turn into sand paper like your bunk carpet will.

Bunks come with the half-moon slider bracket (in the bunk track) as shown above and simply bolts to your existing vertical brackets on nearly any brand of lift! If you need all new mounting hardware with it, we'll need to know the cradle dimensions of your lift to get the appropriate U-Bolt sizes to fit your cradle.

7' SUPERIOR Universal Poly/ Aluminum Replacement PWC Lift Bunks-Price Per Pair- $299 plus tax

12' SUPERIOR Universal Poly/ Aluminum Replacement Bunks-Price Per Pair- $435 plus tax

14' SUPERIOR Universal Poly/ Aluminum Replacement Bunks-Price Per Pair- $524 plus tax

SHIPPING: We're sorry, due to the outrageous cost of shipping something of this size WE DO NOT OFFER SHIPPING.

18" Powder-Coated Steel U-Channel Bunk Upright Bracket-Reqires 4 Per Bunk Pair (Requires U-bolts) Sold Each- $25 plus tax

24" Inboard Ski/ Wake Boat Powder-Coated Steel U-Channel Bunk Upright-Reqires 8 Per Bunk Pair (Double Brackets Back-to-Back Around Cradle with 1/2" Diameter Straight Bolts- Bolts Not Included) Sold Each- $35 plus tax

5.5" U-Bolt for 18" Upright (For 2"x5" Standard Cradle Beams, Reqires 4 Per Bunk Pair)- Sold Each $15 plus tax

6.5" U-Bolt for 18" Upright (For 2"x6" Standard Cradle Beams-Reqires 4 Per Bunk Pair)- Sold Each $15 plus tax

UV-Treated Marine Carpet for DIY Wooden Bunk Replacement

Bunk Carpet- For DIY Bunk & Guide Restoration

        DIY Bunk Carpet- UV Treated Marine Grade- Sold Per Linear Foot x 12" Width for 2"x6" Bunks    $4 per linear foot plus tax   

***All prices, available inventory, and product lines are subject to change without notice!***